Livraison gratuite sur les commandes de 49 $ et plus

Votre commande peut prendre jusqu'à 24-48 heures pour traitement. Une fois complété, le délai de livraison varie de 1-5 jours ouvrables selon l'addresse de livraison.

LIVRAISON GRATUITEpour toutes les commandes au-dessus de 49 $ au Canada! Commandes inférieures à 49 $, le frais d'expédition est seulement 7,95 $! *Livraison gratuite n'est pas disponible quand l’adresse d’expédition est un lieu éloigné.Plus >>

Livraison gratuite sur les commandes de 49 $ et plus

Votre commande peut prendre jusqu'à 24-48 heures pour traitement. Une fois complété, le délai de livraison varie de 1-5 jours ouvrables selon l'addresse de livraison.

LIVRAISON GRATUITEpour toutes les commandes au-dessus de 49 $ au Canada! Commandes inférieures à 49 $, le frais d'expédition est seulement 7,95 $! *Livraison gratuite n'est pas disponible quand l’adresse d’expédition est un lieu éloigné.Plus >>

43215
Haven't used them yet, but they seem to be fine. Will be using them as laundry mesh bags, instead of the usual plastic ones.
11 août 2024
The metal peg board is actually quite heavy, so it feels like it will last a while. The clamp part (other than the knob) is also metal. The rectangular and cup container and the "phone" frame are plastic. The other parts are also metal-based.
11 août 2024
pretty happy with the shredder, though I'm an intermittent user only. Have only done paper/labels/bubblewrap envelopes so far since the other reviews mentioned it doens't do plastic well. I mainly use it to shred addresses from mail/receipts/mailers. I find this shredder does a pretty good job of "sucking" in small pieces of paper (like an address cut out of an envelope), as long as you push it in far enough. Cross cut is good enough for my purposes. It's "bigger" in physical dimension than I expected (I didn't pay attention to the size specs) so if you're short on space, double check!
27 juil. 2024
It has some rough edges, especially where the holes have been cut out. I gave myself a splinter! The "stopper" at the bottom (so your papers/laptop doesn't slide down) is hidden in the side drawer. Mine had a big "nick" in the edge that makes it stabby. When closed, the two surfaces (the part that raises to an angle vs. the part that is stationery with the cup groove) are not level (off by 5mm at the centre), which could be a deal breaker if someone really wanted a flat surface. Rising the legs works and seems pretty stable when basic force is applied downwards. The fans work too. I like that the fan has a built in coil for the USB-A connection, and should be long enough to reach a laptop that is sitting on the table surface.
27 juil. 2024
The finish is OK...most of the edges are sanded down but there are brittle/broken pieces on "inside" of some edges. Some of the curved tops have uneven rounding, if that matters to anyone. One of the pieces also had a bunch of strange gray splotches over it that didn't look like bamboo grain. After assembling it wasn't *super* level, but it still works the way I wanted it to and I don't plan to move it around, so still think it's pretty good value. As others have mentioned, there are no instructions, so I looked at the product photos online to assemble it. What's not obvious is that you need to install the bottom-right horizontal shelf with the correct piece of bamboo (i.e., the piece with the 2 holes drilled into the underside of the horizontal surface). Those holes for you to place the two provided blunt slidey-metal knobs, that let you slide the shelf along the groove of the bottom-left shelf's topside horizontal surface.
27 juil. 2024
pretty easy to assemble and seems sturdy. Great value and in a colourway that I don't see often!
27 juil. 2024
I needed this to plug into a laptop far away, but still be able to use audio and mic. Seems to be working so far and haven't heard any complaint from my coworker about sound quality!
19 jan. 2024
Exactly as described! Didn't realize the middle 3 pots (white and gray pots) were a bit larger than the black ones, but I can see that's true to the picture after looking closely. Nice if you can't be bothered to make your own macrame hahahaha
19 jan. 2024
Was a bit of a beast to assemble, so my advice is to make sure your criss-crossing is consistent on both sides. Otherwise is sturdy and compact!
19 jan. 2024
plastic was too thick for my door frame, but I'm still able to use it for other spots (like wire racks) at least! You might have to add more "padding" so it sits straight/flush in case you "hang over width" isn't as thick as the top straight part of this hook.
19 jan. 2024

Loading...