When I got the boot, the packaging and quality looked good. However, the material seems stiff which I didnt mind so much but one issue I have is the length of the curve on the boot is too short. As when I attach the boot to the cat6 plug because the length of the curve on the boot is so short the plug does not lock on the ethernet port. I would need to remove the boot or cut the plastic curve to allow the plug to lock.

Good value for money

Reply by our customer service

Hi there, Thank you for posting a review and for the positive feedback about "Cab-7275." If there's anything else that we can assist you with, please don't hesitate to call us at 1-866-979-7463, or contact our customer service by live chat or send us an email to support@shopperplus.com. Thank you!

Not very white and it's a bit on the hard side.

Reply by our customer service

Hi John, Thanks for sharing your feedback on Cat5e Cat6 RJ45 Ethernet Network Cable Strain Relief Boots, 50 Pcs/Bag - White - PrimeCables®. If you have any other questions, you may reach out to us by submitting an online inquiry, initiating a chat or by phone at 1-866-979-7463.

very stiff material but should work for what I need to do. difficult to push tab down with this installed.

I find it a little difficult to press the lock tab down. I prefer the ends on the pre-made primecables cables. Doesn't seem to quite fit the cab-7245 RJ45 plugs. It's like they need to go on another mm or two to get the lip over the edge of the plug.

Did not fit my 23 gauge Cat 6A cables.

Reply by our customer service

Dear customer, thank you for your review. Our agent will contact you to better resolve the issue. Thank you.