This is a rebranded of the Orvibo sensor. Works great with smartthings with a custom DTH. The motion detection is as quick as the Iris motion from Lowes and timeout is around 10 secs. The detection led is a little too bright and there's no way to turn it off but if you are handy. You could open up the sensor and put some black electrical tapes on the 2 leds. https://github.com/Kriskit/SmartThingsPublic/blob/master/devicetypes/kriskit/orvibo/orvibo-motion-sensor.groovy

Reply by our customer service

Dear customer, thanks for writing in, we appreciate your feedback, please call us at 1-866-979-7463 or email us at support@123ink.ca if you have any questions.

These have an impressive range. Much better than the 10 meters you normally get from a ZigBee device. But they will not work in the cold. I had installed a sensor on my deck, but as soon as the temperature dropped below 0, it started triggering a motion event every second. Really good for indoor use, but not for outdoor use.

Motion Sensors work very well. I've paired them to a SmartThings hub instead of the Zigbee hub and it captures all motion in the rooms that I've set them in. I like that notifications can be sent to my phone and announcements can be made via Alexa when motion is detected in the rooms where they are set up.

Reply by our customer service

Dear customer, thanks for writing in, we appreciate your feedback, please call us at 1-866-979-7463 or email us at support@123ink.ca if you have any questions.

Good product, easy to setup !

Reply by our customer service

Dear customer, We appreciate your review. We are glad that you like the product. If you have any other questions, please don't hesitate to contact us at 1-866-979-7463. Thank you and have a nice day!

Haven't had a chance to install yet, but seems nice

Reply by our customer service

Thank you very much for your review. If you have any other questions or concerns, please contact our customer service at 1-866-979-7463!

Good